Fujitsu DX8100 S2/DX8700 S2 Manual De Usuario
Chapter 6 RAID Group Management
6.1 RAID Group Status
6.1 RAID Group Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED
P2X0-1090-10ENZ0
170
•
Stripe Depth
The Stripe Depth (*1) of the RAID group is displayed.
If the RAID type is "Mirroring (RAID1)", a "-" (hyphen) is displayed.
The Stripe Depth (*1) of the RAID group is displayed.
If the RAID type is "Mirroring (RAID1)", a "-" (hyphen) is displayed.
*1:
The number of logical blocks that are assigned to a drive for each stripe when configuring a stripe volume in a
RAID group. Normally, it is 64KB.
RAID group. Normally, it is 64KB.
-
64 KB
-
128 KB
-
256 KB
-
512 KB
-
1024 KB
6.1.6
RAID Group (Volume Layout)
Detailed information of the volume layout is displayed.
The following items are displayed in the Main area:
•
Start LBA
The first Logical Block Address (LBA) of the volume is displayed.
The first Logical Block Address (LBA) of the volume is displayed.
•
Capacity
The volume capacity is displayed.
If the volume capacity exceeds 1023.99MB, the capacity is displayed in units of "GB". If the volume capacity
exceeds 1023.99GB, the capacity is displayed in units of "TB". The capacity is rounded off to two decimal
places. To check the volume capacity in units of "MB", use CLI.
The volume capacity is displayed.
If the volume capacity exceeds 1023.99MB, the capacity is displayed in units of "GB". If the volume capacity
exceeds 1023.99GB, the capacity is displayed in units of "TB". The capacity is rounded off to two decimal
places. To check the volume capacity in units of "MB", use CLI.
•
Volume No.
The volume number is displayed. Unused space is displayed as "Free".
The volume number is displayed. Unused space is displayed as "Free".
•
Volume Name
The volume name is displayed.
The volume name is displayed.
•
Volume Status
The volume status is displayed. Refer to
The volume status is displayed. Refer to
for detailed information of volume
status.