Toshiba MA-516-100 Manual De Usuario

Descargar
Página de 166
- 36 -
EO1-11116
MA-516-100 SERIES
......... No operations in REG, MGR or
-  mode will be allowed until a
Sign ON is again operated by
a cashier.
0
LOG
RECEIPT
The MA-516 adopts one of the following cashier-identifying methods.
(1) Signing Method, using the [LOG/RECEIPT] key.
(2) Cashier Push Key Method, using Cashier Keys (stay-down keys)
Method (1) is the standard feature. To change the cashier-identifying method from (1) to (2), appropriate System Option
selections are necessary as well as hardware option. 
(Refer to System Option, Address 15 - Bit 5 on page 133 in
Chapter 22.)
A cashier needs to “sign ON” for starting transaction entries on the register and identifying the operator. The signed-
ON condition is held until a “sign OFF” is operated. A cashier can sign ON only when the register is in the signed-
OFF condition. A maximum of 8 cashiers can be identified in this signing method.
Sign ON
 (operable in signed-OFF condition)
Use the REG Key to
turn the Control Lock to
the REG (or MGR or  -  )
position.
The code being entered
is not displayed.
OFF
Z
REG
X
SET
MGR
-
.....
The “SIGN ON” lamp illuminates, and a Sign
ON receipt is issued 
(see the next page).
......... Transaction entries are now
possible (see the following
pages).
Cashier Code assigned to each cashier by the store
(1 digit; 1 to 8)
Secret Code generated by the cashier
(2 digits; any number from 01 to 99)
See NOTE 1 below.
Sign OFF
 (operable in signed-ON condition)
Same Control Lock position as
the Sign ON 
(changing the
position in a signed-ON condi-
tion will cause an error.)
LOG
RECEIPT
→
.....
→
The “SIGN ON” lamp is extinguished, and a Sign
OFF receipt is issued 
(see the next page).
NOTES
1. The two-digit Secret Code portion, once entered for a cashier’s Sign ON, is set in the memory
of the register. The Secret Code of the same cashier is checked every time his/her Sign ON
is operated until the Daily Cashier Reset Report is taken at the end of the day. Then the
Secret Code is reset and a new Secret Code entry will be allowed . When the Secret Code
is within the range of 01 to 09, it is omissible to enter the preceding zero.