Cisco Systems 1552H Manual De Usuario
2-18
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-24247-01
Chapter 2 Installing the Access Point
Mounting the Access Point
Installing the Mounting Bracket on a Pole (All Models)
When installing an access point on a vertical pole, mast, or a streetlight pole, you should use the optional
Cisco pole mount kit. The kit supports metal, wood, or fiberglass poles from 2 to 16 inches in diameter.
Cisco pole mount kit. The kit supports metal, wood, or fiberglass poles from 2 to 16 inches in diameter.
Assembling the Pole Clamp Bracket and the Mounting Bracket
When installing an access point on a pole, mast, or a streetlight, you should use the optional Cisco pole
mount kit. The kit supports metal, wood, or fiberglass poles from 2 to 16 inches in diameter.
mount kit. The kit supports metal, wood, or fiberglass poles from 2 to 16 inches in diameter.
The pole mount kit contains several parts that you must assemble prior to mounting on a pole. First you
need to assemble two strap brackets on the pole clamp bracket that are positioned for the pole diameter
you are using to mount the access point.
need to assemble two strap brackets on the pole clamp bracket that are positioned for the pole diameter
you are using to mount the access point.
illustrates the pole diameter indicators and bolt holes
on the pole clamp bracket.
Figure 2-8
Pole Clamp Bracket Adjustment Hole Locations
To assemble the pole clamp bracket, follow these steps:
1
Pole size indicators
•
2 to 6 in.
•
6 to 11 in.
•
11 to 16 in.
2
Bolt holes for pole diameters (11 to 16
inches indicated)
inches indicated)