Cisco Systems 1552H Manual De Usuario
2-19
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-24247-01
Chapter 2 Installing the Access Point
Mounting the Access Point
Step 1
Position the strap brackets on the pole clamp bracket for the pole diameter you are using and secure each
strap bracket with two M8 x16 bolts (with lock washers) (see
strap bracket with two M8 x16 bolts (with lock washers) (see
). Tighten the bolts to 13 to 15
ft lbs (17.6 to 20.3 Nm).
Figure 2-9
Assembled Pole Clamp Bracket and Strap Brackets
Step 2
Screw the M8 nut onto the pole clamp bracket support bolt, and tighten just enough to prevent the bolt
from falling off.
from falling off.
Step 3
Go to the
.
1
M8 x1.25x16 bolts (with lock washers) 3
Strap bracket (shown positioned for 11
to 16 inch diameter pole)
to 16 inch diameter pole)
2
Pole clamp bracket