Cisco Systems 1552H Manual De Usuario

This unit might have more than one power supply connection. All connections must be removed to 
de-energize the unit. Statement 1028

If your access point contains a backup battery pack, you must press the reset button for 10 
seconds or more (see the

 

Ensure a 6 AWG ground wire is connected to the access point (see the 

Use an adjustable wrench, a 22-mm socket, or the Sealcon S-2200-WR wrench to remove the Ethernet 
connector plug from the access point (see 

 for the location).

For information on data cable entry, refer to 

Loosen the round end of the liquid-tight adapter by turning counterclockwise, but do not remove (see 

PoE-in port

PoE-out port

4

5

6

255260