Cisco Systems 1550 Manual De Usuario

Screw a M8 x16 bolt (with flat and lock washers) into the second bolt hole on each side of the access 
point (see 

). 

Depending on what you purchased, ensure that the front of the 1552E/EU access point is vertical, or that 
the 1552I access point is horizontal, and tighten the four bolts to 13 to 15 ft lbs 
(17.6 to 20.3 Nm).

For the 1552E/EU model continue with 

. For the 1552I model continue 

with 

 and 

.

There are three different options for mounting the 1552C or 1552CU access point:

When mounting the access point on a cable strand, you must use the optional strand mount kit. The kit 
contains several parts that you should assemble before mounting on a cable strand. To install the access 
point to a cable strand, you need to perform these operations:

Assemble cable brackets; attach cable clamps to the clamp bracket.

Attach the strand brackets to the access point.

Attach the clamp bracket to the fiber or cable strand.

Attach a ground wire.

Connect cables and power to the access point.

The access point must be installed on a cable strand by a professional cable installer.

345826