Fujitsu P3NK-4452-01ENZD Manual De Usuario

XG Series User's Guide

Chapter 5 Command Reference

Port Information Settings

Function

Set the destination address for "ether" L3 monitoring of link aggregation.

Available Model

XG0224 / XG0448 / XG2600

Syntax

linkaggregation <group> icmpwatch address <dst_addr>

Options

<group>
•

Link aggregation group number
Set a link aggregation group number with a decimal number.

<dst_addr>
•

Destination IP address to be monitored
Specify the destination IP address to be monitored.
The allowable range is as follows:
1.0.0.1 to 126.255.255.254
128.0.0.1 to 191.255.255.254
192.0.0.1 to 223.255.255.254

Use Mode

Configuration mode (admin class)

Explanation

Set the operation information for destination monitoring.
This command sends an ICMP ECHO packet from the specified link aggregation group to 
the destination IP address, specified by <dst_addr>, and checks the presence of the 
destination by receiving a response.

Caution

Do not set the IP address of the local device in <dst_addr>. Also, make sure that the 
specified IP address is included in the same subnet.
If any of the above three addresses is specified, the Ethernet L3 monitoring function will 
not operate normally.

Default

It is assumed that the Ethernet L3 monitoring function is not used for the link aggregation.

1 to 13

XG0224

1 to 26

XG0448

1 to 10

XG2600