Fujitsu P3NK-4452-01ENZD Manual De Usuario

XG Series User's Guide

Chapter 5 Command Reference

Port Information Settings

Function

Set the linked port list information about the linkaggregation Linkdown Relay function.

Available Model

XG0224 / XG0448 / XG2600

Syntax

linkaggregation <group> downrelay port <portlist>

Options

<group>
•

Link aggregation group number
Set a link aggregation group number with a decimal number.

<portlist>
•

Relay port list
Set a list of the Ethernet ports that places the linked port offline (linkdown) by linkdown 
where this definition has been set.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")

Use Mode

Configuration mode (admin class)

Explanation

If a linkdown occurs in the linkaggregation set with this definition, set a list of the Ethernet 
ports that will also linkdown (port linkdown).
If a linkdown relay operation occurs, its linked port goes to an offline state, and a system 
log is output.

Caution

•

If ports are offline, release them with the 

 command in port releasing.

•

The definition is applied normally even if a port set with linkaggregation is included on 
the relay operation port list.

•

When the Ethernet port type is a linkaggregation port, and this definition is set in the 
linkaggregation settings, this definition becomes enabled and the Linkdown Relay 
function is ignored.

•

The linked port does not change to offline status during the dynamic definition change 
Linkdown operation on the Ethernet port where this command is set.

Default

The Linkdown Relay function is not executed, assuming that port list information has not 
been set.

1 to 13

XG0224

1 to 26

XG0448

1 to 10

XG2600