Fujitsu P3NK-4452-01ENZD Manual De Usuario

XG Series User's Guide

Chapter 5 Command Reference

LAN Information Settings

- For ACL to set ICMP

Result of multiplication between the number of ICMP TYPEs and the number of 
ICMP CODEs for ICMP

- For ACL not to set TCP, UDP, or ICMP

1

You can expand the upper limit to use 

 command and change 

resource distribution.

Note 4.

Up to 700 commands can be set for the entire device, including the definitions which refer 
to ACL such as 

, 

, 

 and "serverinfo filter" commands.

Default

It is assumed that DSCP value rewriting is not performed.

Function

Change the priority of DSCP value rewriting conditions.

Available Model

XG0224 / XG0448 / XG2600

Syntax

lan [<number>] ip dscp move <count> <new_count>

Options

<number>
•

lan definition number
Specify a lan definition serial number with a decimal value.
The default is 0.

<count>
•

Target DSCP value rewriting definition number
Specify a DSCP value rewriting definition number before the priority was changed.

<new_count>
•

Destination DSCP value rewriting definition number
Specify a new priority for <count> with a decimal value.
If any definition with the same definition number exists, it will be inserted before the 
existing one.

Use Mode

Configuration mode (admin class)

Explanation

Change the priority of DSCP value rewriting conditions.

0 to 511

XG0224 / XG0448

0 to 63

XG2600