Fujitsu P3NK-4452-01ENZD Manual De Usuario

XG Series User's Guide

Chapter 5 Command Reference

LAN Information Settings

Function

Sets static ARP.

Available Model

XG0224 / XG0448

Syntax

lan [<number>] ip arp static <count> <dst> <mac>

Options

<number>
•

Defined LAN number
The sequential number of a LAN definition expressed in base 10.
Default is 0.

<count>
•

Static ARP table entry number
The static ARP table entry number, expressed as a base 10 number from 0-199.
If an entry already exists in the table at the entry number specified, the command will 
modify the existing entry.

<dst>
•

Destination IP address
Specifies the destination IP address to be registered in the static ARP table.
Below are the ranges of IP addresses that may be specified.

<mac>
•

MAC address
Specifies the MAC address to use when sending packets to the destination IP address.
Specify in the format xx:xx:xx:xx:xx:xx (where xx is a two-digit, base 16 value).

Use Mode

Configuration mode (admin class)

Explanation

Sets static ARP entries in the ARP table.

Caution

Multiple ARP entries may not be made for the same destination IP address.
The static ARP function will not operate for interfaces in which the IP address is not set.
MAC addresses cannot be set to broadcast or multicast.

Default

If unset, the static ARP function will not be used.