Fujitsu P3NK-4452-01ENZD Manual De Usuario
XG Series User's Guide
Chapter 5 Command Reference
Device Information Settings
271
5.15.1.18 snmp user address
Function
Set a SNMP host address.
Available Model
XG0224 / XG0448 / XG2600
Syntax
snmp user [<number>] address [<addr_number>] <address>
Options
<number>
•
•
User definition number
Specify a user definition number with a decimal value from 0 to 7.
The default is 0.
Specify a user definition number with a decimal value from 0 to 7.
The default is 0.
<addr_number>
•
•
SNMP host definition number
Specify a SNMP host definition number with a decimal value from 0 to 7.
The default is 0.
Specify a SNMP host definition number with a decimal value from 0 to 7.
The default is 0.
<address>
•
•
SNMP host address
Specify an IP address of the host, which permits SNMPv3 access, in the
XXX.XXX.XXX.XXX format, where "XXX" indicates a 3-digit decimal value.
The allowable range is as follows:
1.0.0.1 to 126.255.255.254
128.0.0.1 to 191.255.255.254
192.0.0.1 to 223.255.255.254
Specify an IP address of the host, which permits SNMPv3 access, in the
XXX.XXX.XXX.XXX format, where "XXX" indicates a 3-digit decimal value.
The allowable range is as follows:
1.0.0.1 to 126.255.255.254
128.0.0.1 to 191.255.255.254
192.0.0.1 to 223.255.255.254
Use Mode
Configuration mode (admin class)
Explanation
Set a SNMP host address under SNMPv3. Up to eight addresses can be defined for this
device, including ones set in the
device, including ones set in the
command.
Default
It is assumed that no SNMP host address is set.