Fujitsu P3NK-4452-01ENZD Manual De Usuario
XG Series User's Guide
Chapter 5 Command Reference
Device Information Settings
273
5.15.1.20 snmp user auth
Function
Set the authentication protocol
Available Model
XG0224 / XG0448 / XG2600
Syntax
snmp user [<number>] auth <protocol> [<password> [encrypted]]
Options
<number>
•
•
User definition number
Specify the user definition number with a decimal value from 0 to 7.
The default is 0
Specify the user definition number with a decimal value from 0 to 7.
The default is 0
<protocol>
Specify the authentication protocol
•
none
Specify it when unusing authentication protocol.
Specify it when unusing authentication protocol.
•
md5
Specify it when using MD5(HMAC-MD5-96)
Specify it when using MD5(HMAC-MD5-96)
•
sha
Specify it when using SHA (HMAC-SHA-96)
Specify it when using SHA (HMAC-SHA-96)
<password>
Set the authentication password
•
In the case of specifying unencryption password
•
In the case of specifying encryption password
Specify the encrypted authentication password shown by show command with
"encrypted"
Specify the characters which is shown by show command
Specify the encrypted authentication password shown by show command with
"encrypted"
Specify the characters which is shown by show command
encrypted
•
•
Specify encrypted authentication password
Specify it when specifying encrypted authentication password in <password>
Specify it when specifying encrypted authentication password in <password>
Use Mode
Configuration mode (admin class)
Explanation
Set authentication protocol for SNMPv3
Default
It is assumed that the authentication protocol is not use.
Authentication Protocol
Password length
md5
sha1
sha1
8-16 characters
8-20 characters
8-20 characters
snmp user <number> auth none