Fujitsu P3NK-4452-01ENZD Manual De Usuario
XG Series User's Guide
Chapter 5 Command Reference
Device Information Settings
305
5.15.8.10 serverinfo ftp filter
Function
Set the application filter for the FTP server function.
Available Model
XG0224 / XG0448 / XG2600
Syntax
serverinfo ftp filter <count> <action> acl <acl_count>
Options
<count>
•
•
Filtering definition number
Specify a definition number, which indicates a filtering priority, with a decimal value
from 0 to 29.
A smaller value has a higher priority.
Specify a definition number, which indicates a filtering priority, with a decimal value
from 0 to 29.
A smaller value has a higher priority.
<action>
Specify an operation when filtering conditions are satisfied.
•
accept
Transmit the relevant packet.
Transmit the relevant packet.
•
reject
Block the relevant packet.
Block the relevant packet.
<acl_count>
•
•
ACL definition number
Set the required ACL definition number with a decimal value.
If the ACL specified in <acl_count> is not set, the filtering definition will be disabled and
ignored.
The following ACL definition is available for application filtering.
Set the required ACL definition number with a decimal value.
If the ACL specified in <acl_count> is not set, the filtering definition will be disabled and
ignored.
The following ACL definition is available for application filtering.
•
ip
Set only the source IP address and the number of mask bits.
If the ip value is not set, the filtering definition will be disabled and ignored.
Set only the source IP address and the number of mask bits.
If the ip value is not set, the filtering definition will be disabled and ignored.
Use Mode
Configuration mode (admin class)
Explanation
Set the application filter for the FTP server function.
Default
It is assumed that the application filter is not set for the FTP server function.