Fujitsu P3NK-4452-01ENZD Manual De Usuario
XG Series User's Guide
Chapter 5 Command Reference
Device Information Settings
307
5.15.8.13 serverinfo sftp
Function
Set the SSH FTP server function.
Available Model
XG0224 / XG0448 / XG2600
Syntax
serverinfo sftp ip <mode>
Options
<mode>
•
•
on
Enable the SSH FTP server function.
Enable the SSH FTP server function.
•
off
Disable the SSH FTP server function.
Disable the SSH FTP server function.
Use Mode
Configuration mode (admin class)
Explanation
Set whether or not to enable the SSH FTP server function.
Setting this command OFF and the
Setting this command OFF and the
command Off will reject a connection
request using the IPv4 address from the sftp client.
Setting this command OFF and the
Setting this command OFF and the
request using the IPv4 address from the sftp client after the password was entered.
Caution
Enabling this command generates an SSH host authentication key at device power-on
and execution of the
and execution of the
command, and it takes several tens of seconds to several
minutes for the processing time.
sftp connection is enabled after the SSH host authentication key generation was
completed.
If this device has been started to enable this function while all the ssh and sftp functions
were Off, it also takes several tens of seconds to several minutes for the processing time
to generate an SSH host authentication key. Note that other processes may be affected;
session monitoring timeout may occur, for example.
sftp connection is enabled after the SSH host authentication key generation was
completed.
If this device has been started to enable this function while all the ssh and sftp functions
were Off, it also takes several tens of seconds to several minutes for the processing time
to generate an SSH host authentication key. Note that other processes may be affected;
session monitoring timeout may occur, for example.
Default
It is assumed that the SSH FTP server function is enabled.
serverinfo sftp ip on