Fujitsu P3NK-4452-01ENZD Manual De Usuario

XG Series User's Guide

Chapter 3 Installation

Workflow for Initial Setup of the Device

The initial setting of the LAN interface is for only IPv6 link-local address.

To use the following functions, configure the LAN interface.

•

Telnet connection

•

SNMP manager connection

•

System log transmission

•

Time synchronization using an NTP/SNTP server

•

Configuration file upload/download

•

Firmware update

•

Collection of maintenance information

To configure the LAN interface, carry out the following procedure.

The "Telnet server function" is initially enabled.
The telnet session timeout period is initially 5 minutes.
To change the telnet session timeout period, carry out the following procedure in "admin" Operation mode.

Login:admin
Password:

Login to the device from the serial terminal. The user name is
"admin". Type the password for uset "admin".

XG2600# configure

Switch to Configuration mode.

XG2600(config)# oob ip address A.B.C.D/M 3

Set the IP address, subnet, and default gateway of the LAN interface 
for management port. (XG2600 only)

XG2600(config)# lan 0 ip address A.B.C.D/M 3
XG2600(config)# lan 0 vlan 1

Set the IP address, subnet, and default gateway of the LAN interface 
for VLAN ID 1.

XG2600(config)# proxydns domain 0 any * any 
static A.B.C.D

(Optional)
Set up DNS servers.

XG2600(config)# commit

Apply the configuration.

XG2600(config)# save

Save the configuration.

XG2600(config)# exit

Switch to Operation mode.

XG2600# configure

Switch to Configuration mode.

XG2600(config)# telnetinfo autologout 30m

Set the Telnet session timeout period (30 minutes).
If the Telnet session timeout period expires the telne connection is 
terminated.

XG2600(config)# commit

Apply the configuration.

XG2600(config)# save

Save the configuration.

XG2600(config)# exit

Switch to Operation mode.