Fujitsu P3NK-4452-01ENZD Manual De Usuario
XG Series User's Guide
Chapter 4 Switch Functions and their Configuration
Basic Switch Functions
62
4.1.2
MAC Address Table Management
The MAC address table is a database used for managing the association between address information and destination ports.
XG0224 and XG2600 can learn up to 16000 entries of MAC addresses.
XG0448 can learn up to 32000 entries of MAC addresses.
XG0448 can learn up to 32000 entries of MAC addresses.
•
Dynamic MAC address learning
The device dynamically learns MAC addresses from received frames. If MAC addresses are not refreshed before the
aging time expires, they will be removed frame MAC address table.
To disable the dynamic learning, carry out the following procedures in "admin" Operation mode.
The device dynamically learns MAC addresses from received frames. If MAC addresses are not refreshed before the
aging time expires, they will be removed frame MAC address table.
To disable the dynamic learning, carry out the following procedures in "admin" Operation mode.
To change aging time period of MAC address learning table, carry out the following procedures in "admin" Operation
mode..
mode..
•
Static unicast address
By registering a unicast MAC address with the MAC address table, unicast frames are forwarded to a specified port.
Static unicast addresses are not subject to MAC address removal controlled by the aging function.
To register, change or delete a static unicast address, carry out the following procedures in "admin" Operation mode.
By registering a unicast MAC address with the MAC address table, unicast frames are forwarded to a specified port.
Static unicast addresses are not subject to MAC address removal controlled by the aging function.
To register, change or delete a static unicast address, carry out the following procedures in "admin" Operation mode.
Command
Task
XG2600# configure
Switch to Configuration mode.
XG2600(config)# mac learning off
Disable the dynamic MAC address learning.
XG2600(config)# commit
Apply the configuration.
XG2600(config)# save
Save the configuration.
XG2600(config)# exit
Switch to Operation mode.
Command
Task
XG2600# configure
Switch to Configuration mode.
XG2600(config)# mac age 1000
Change aging time period of MAC address learning table.
XG2600(config)# commit
Apply the configuration.
XG2600(config)# save
Save the configuration.
XG2600(config)# exit
Switch to Operation mode.
Command
Task
XG2600# configure
Switch to Configuration mode.
XG2600(config)# vlan <vid> forward <count>
<dst_addr> <port>
Register a static unicast address, destination port and vlan with
the MAC address table (or remove them from it).
the MAC address table (or remove them from it).
XG2600(config)# delete vlan <vid> forward
XG2600(config)# commit
Apply the configuration.
XG2600(config)# save
Save the configuration.
XG2600(config)# exit
Switch to Operation mode.