Fujitsu P3NK-4452-01ENZD Manual De Usuario
XG Series User's Guide
Chapter 4 Switch Functions and their Configuration
Basic Switch Functions
64
•
XG0224/XG0448
4.1.6
Egress Rate Control (XG2600 Only)
It is possible to set an egress rate-limiting value for each port in approximately 40Mbps increments.
To set an egress rate-limiting value, carry out the following procedures in "admin" Operation mode.
Command
Task
XG0224# configure
Switch to Configuration mode.
XG0224(config)# ether 1-5 mac storm 20000000
discard close
Enable storm control, set threshold 20000000 pps, set "discard"
when broadcast traffic exceeds the threshold, set "close" when
multicast traffic exceeds the threshold.
when broadcast traffic exceeds the threshold, set "close" when
multicast traffic exceeds the threshold.
XG0224(config)# commit
Apply the configuration.
XG0224(config)# save
Save the configuration.
XG0224(config)# exit
Switch to Operation mode.
Command
Task
XG2600# configure
Switch to Configuration mode.
XG2600(config)# ether 1-5 ratecontrol 8000m
Specify an egress rate limiting value by 8000M bps for port 1-5.