Emerson 752I Manual De Usuario
Monitor:
Other Commands
15-26
Setting PCI Mode to Multi ... Complete
=>
=>
setspr
The setspr command sets the contents of the SPR register specified by SPR_ID to
SDR_Value.
SDR_Value.
Definition:
setspr SPR_ID SPR_Value
script
The script command runs a list of monitor commands out of memory. The list is an ASCII
string of commands separated by the
string of commands separated by the
;
character and terminated with the
;;
charac-
ter sequence. <script address> is the starting location of the script.
Definition:
script script_address
showmac
The showmac command displays the Processor MAC addresses.
Definition:
showmac
showpci
The showpci command scans the PCI bus and lists the base address of the devices.
Definition:
showpci
showtemp
The showtemp command continuously displays the junction temperature for the 750GL
CPU. The processor sensors are not calibrated, so some offset error is probable.
CPU. The processor sensors are not calibrated, so some offset error is probable.
Definition:
showtemp
sleep
The sleep command executes a delay of N seconds.
Definition:
Delay execution for N seconds (N is a decimal value).
sleep N
vdhcp
The vdhcp command sends out a DHCP request and then waits for the response from a
DHCP server. If available, a vendor-specific module (loaded at 0xFFF6,8000) processes vari-
ous request/response options.
DHCP server. If available, a vendor-specific module (loaded at 0xFFF6,8000) processes vari-
ous request/response options.
Definition:
vdhcp