Emerson 752I Manuel D’Utilisation

 Other Commands

Katana®752i User’s Manual

Setting PCI Mode to Multi ... Complete
=>

The setspr command sets the contents of the SPR register specified by SPR_ID to 
SDR_Value.

setspr SPR_ID SPR_Value

The script command runs a list of monitor commands out of memory. The list is an ASCII 
string of commands separated by the

 ; 

character and terminated with the

 ;; 

charac-

ter sequence. <script address> is the starting location of the script.

script script_address

The showmac command displays the Processor MAC addresses.

showmac

The showpci command scans the PCI bus and lists the base address of the devices.

showpci

The showtemp command continuously displays the junction temperature for the 750GL 
CPU. The processor sensors are not calibrated, so some offset error is probable.

showtemp

The sleep command executes a delay of N seconds.

Delay execution for N seconds (N is a decimal value).

sleep N

The vdhcp command sends out a DHCP request and then waits for the response from a 
DHCP server. If available, a vendor-specific module (loaded at 0xFFF6,8000) processes vari-
ous request/response options.

vdhcp