KYOCERA 205c.255c Manual De Usuario

10-12

Troubleshooting > Solving Malfunctions

Colors appear different than 
you anticipated.

Did you choose appropriate image 
quality for the original?

Select appropriate image quality.

Have you loaded color copy paper into 
the paper tray?

Load color copy paper into the paper 
tray.

—

—

Run [Calibration].

—

Run [Tone Curve Adjustment].

—

When making copies
Adjust the color balance.

When printing from a computer
Adjust the color using the printer driver.

Perform Tone Curve 
Adjustment. is displayed.

Over long periods of use, the effects of 
the ambient temperature and humidity 
can cause color output hues to vary 
slightly.

Run [Tone Curve Adjustment].

The machine makes a 
clicking sound before starting 
to print or after printing.

—

The machine is adjusting itself. It is not 
a machine failure.

—

Cannot send via SMB.

Is the network cable connected?

Connect the correct network cable 
securely.

Have the network settings for the 
equipment been configured properly?

Configure the TCP/IP settings 
properly.

Have the folder sharing settings been 
configured properly?

Check sharing settings and access 
privileges under the folder properties.

Has the SMB protocol been set to 
[On]?

Set the SMB protocol setting to [On].

Has the [Host Name] been entered 
properly?*

Check the name of the computer to 
which data is being sent.

Has the [Path] been entered properly?

Check the share name for the shared 
folder.

Has the [Login User Name] been 
entered properly?*,**

Check the domain name and login 
user name.

Has the same domain name been 
used for the [Host Name] and [Login 
User Name]?

Delete the domain name and 
backslash ("\") from the [Login User 
Name].

Has the [Login Password] been 
entered properly?

Check the login password. 

Have exceptions for Windows Firewall 
been configured properly?

Configure exceptions for Windows 
Firewall properly.

6-11
6-14

Do the time settings for the equipment, 
domain server, and data destination 
computer differ?

Set the equipment, domain server, and 
data destination computer to the same 
time.

—

Is the touch panel displaying Send 
error.?

Refer to Responding to Send Error.

*

You can also enter a full computer name as the host name (for example, pc001.abcdnet.com).

**

You can also enter login user names in the following formats:
Domain_name/user_name (for example, abcdnet/james.smith)
User_name@domain_name (for example, james.smith@abcdnet)