KYOCERA 205c.255c Manual De Usuario

10-14

Troubleshooting > Responding to Error Messages

Did you select a paper size/
media type that cannot be duplex 
printed?

Press [Paper Selection] to select the 
available paper. 
Press [Continue] to print without using 
Duplex function.

Did you select a paper size/
media type that cannot be offset?

Press [Paper Selection] to select the 
available paper. 
Press [Continue] to print without using 
Offset function.

–

Only one copy is available due to 
processing too many jobs in parallel.
Press [Continue] to continue printing. 
Press [Cancel] to cancel the job.

—

—

This job is canceled because it is 
restricted by User Authorization or Job 
Accounting. Press [End].

—

Have you selected a position that 
cannot be stapled?

Press [Paper Selection] to select the 
available paper. 
Press [Continue] to print without using 
Staple function.

—

Did you select a paper size/type 
that cannot be stapled?

Press [Paper Selection] to select the 
available paper. 
Press [Continue] to print without using 
Staple function.

—

—

Contact your Service Representative.
Press the System Menu/Counter key, 
[Adjustment/Maintenance], [Service 
Setting] and then [Enable Repaired 
Unit]. Press [Execute] to perform Enable 
Repaired Unit.

—

Is the document processor 
open?

Close the document processor.

—

Is the top cover of the document 
processor open?

Close the top cover of the document 
processor.

—

Is the waste toner box full?

Replace the waste toner box.

—

The waste toner box is not installed 
correctly. Set it correctly.

*

When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.

—

Replace the developer unit (g) to our 
specified developer unit. See the leaflet 
supplied with the developer unit.

—

—

Replace the drum unit (f) to our 
specified drum unit. See the leaflet 
supplied with the drum unit for details.

—