OKI 4580 Manual De Usuario

8 Press the START key. The display shows

NO=<OR LOCATION>.

9 Enter the alternate fax number. Refer to the

instructions following Step 5.

10 The display shows G3 COMMUN. SPEED

[33.6K].  Press 

NO

 to adjust the speed and

YES

 to select it.

11 The display shows G3 ECHO PROTECTION

[OFF].  Press 

NO

 to change the setting

and 

YES

 to select it.

12 To continue programming One-Touch keys, go

back to Step 3. If you are finished program-
ming, press the SELECT FUNCTION key.

13 Lift off the plastic cover above the One-Touch

label. Using a pencil, write in the name for your
newly programmed One-Touch key. Then
replace the cover.

Each fax number that you enter or program into
your machine can be up to 40 digits long. When it
is necessary to dial a number which is longer than
40 digits, use the chain dial feature.

To create a chain dial number, program the first 31
digits of the number into a One-Touch key or Auto
Dial number. Then press the 8/+ One-Touch key to
make this a chain dial number. Next, program the
rest of the number into another One-Touch key or
Auto Dial number (or, you can leave the second
part of the number unprogrammed and enter it
manually on the numeric keypad).

To use a chain dial number, select the One-Touch
key or Auto Dial number programmed with the first
part of the chain dial number. The display shows
PRESS OT/AD/SRCH KEY. Then select the
One-Touch key or Auto Dial number programmed
with the second part of the chain dial number. If the
second part of the chain dial number was not
programmed, enter it manually on the numeric
keypad. Press the START key to begin sending the
fax.