Furuno FAX-30 Manual De Usuario

6. MAINTENANCE, TROUBLESHOOTING 

If the FAX-30 cannot be operated from a NavNet/NavNet 3D display unit or a PC, 
the reason can be stray data. Do the procedure shown below to clear the stray 
data and restore normal operation. 

 

1.  Turn off the FAX-30. 
2.  Open the cover of the FAX-30. 

LED

1   2   3   4

O N

O F F

DIP Switch

U18

3.  Turn ON the #1 segment of the DIP switch and then turn on the FAX-30. The 

LED below U18 blinks slowly when default settings have been restored. It 
takes about one minute to restore the settings. 

4.  Turn off the FAX-30. Turn off all segments of the DIP switch. (All segments 

must be turned off, otherwise all clear will be executed at start up.)   

5.  Turn on the FAX-30 and connect it to the PC that has IP address 172.31.x.x. 
6.  Open Internet Explorer at the PC and enter the URL http://172.31.8.1. 

Confirm that the “TOP” display appears. 

7.  Turn off the FAX-30 and close its cover.