Справочник Пользователя для Furuno FAX-30
6. MAINTENANCE, TROUBLESHOOTING
6-7
6.6
All Clear (for technicians)
If the FAX-30 cannot be operated from a NavNet/NavNet 3D display unit or a PC,
the reason can be stray data. Do the procedure shown below to clear the stray
data and restore normal operation.
the reason can be stray data. Do the procedure shown below to clear the stray
data and restore normal operation.
1. Turn off the FAX-30.
2. Open the cover of the FAX-30.
2. Open the cover of the FAX-30.
LED
1 2 3 4
O N
O F F
DIP Switch
U18
3. Turn ON the #1 segment of the DIP switch and then turn on the FAX-30. The
LED below U18 blinks slowly when default settings have been restored. It
takes about one minute to restore the settings.
takes about one minute to restore the settings.
4. Turn off the FAX-30. Turn off all segments of the DIP switch. (All segments
must be turned off, otherwise all clear will be executed at start up.)
5. Turn on the FAX-30 and connect it to the PC that has IP address 172.31.x.x.
6. Open Internet Explorer at the PC and enter the URL http://172.31.8.1.
6. Open Internet Explorer at the PC and enter the URL http://172.31.8.1.
Confirm that the “TOP” display appears.
7. Turn off the FAX-30 and close its cover.