Cisco Systems ASR9001 Manual De Usuario
1-11
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
OL-26701-02
Chapter 1 Preparing for Installation
Site Requirement Guidelines
Caution
Do not install the Cisco ASR 9001 Router in any type of fully-enclosed rack that does not have the
required perforated sides or doors; the router requires an unobstructed flow of cooling air to maintain
acceptable operating temperatures for its internal components. Installing the router in any type of
fully-enclosed rack without proper perforation could disrupt the air flow, trap heat next to the chassis,
and cause an over-temperature condition inside the router.
required perforated sides or doors; the router requires an unobstructed flow of cooling air to maintain
acceptable operating temperatures for its internal components. Installing the router in any type of
fully-enclosed rack without proper perforation could disrupt the air flow, trap heat next to the chassis,
and cause an over-temperature condition inside the router.
Air Flow Guidelines for Enclosed Rack Installation
To install a Cisco ASR 9001 Router in a 4-post enclosed cabinet, the front and rear doors of the cabinet
must be removed or be perforated with a minimum of 65% open area (70% for ETSI 800mm racks).
must be removed or be perforated with a minimum of 65% open area (70% for ETSI 800mm racks).
If you are mounting the chassis in a 4-post enclosed cabinet, ensure that you have these clearances aound
the chassis:
the chassis:
•
Rear: Minimum of 3.15 inches (8.00 cm) of clearance
•
Sides: Minimum of 6 inches (15.24 cm) of clearance on each side of the chassis.
shows the side and rear chassis air flow clearance requirements for mounting the
Cisco ASR 9001 Router in a 4-post enclosed rack.