Cisco Systems ASR9001 Manual De Usuario
3-4
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
OL-26701-02
Chapter 3 Installing Modules and Cables in the Chassis
Modular Port Adapters
Figure 3-3
4-Port 10 Gigabit Ethernet Modular Port Adapter
describes the 4-Port 10 Gigabit Ethernet modular port adapter LEDs.
2-Port 10 Gigabit Ethernet Modular Port Adapter
The 2-Port 10 Gigabit Ethernet modular port adapter provides two cages for XFP Ethernet optical
interface modules that operate at a rate of 10 Gbps. The two XFP modules can be 10-Gigabit Ethernet
multimode or single mode connections.
interface modules that operate at a rate of 10 Gbps. The two XFP modules can be 10-Gigabit Ethernet
multimode or single mode connections.
Each XFP cage on the 2-Port 10 Gigabit Ethernet modular port adapter has an adjacent Link LED visible
on the front panel. The Link LED indicates the status of the associated XFP port, as described in
on the front panel. The Link LED indicates the status of the associated XFP port, as described in
.
Refer to
for an example of the 2-Port 10 Gigabit Ethernet modular port adapter.
330784
ST
A
TUS
A9K-MP
A-4X10GE
A9K-MP
A-4X10GE
0
3
2
1
Table 3-2
4-Port 10 Gigabit Ethernet Modular Port Adapter LEDs
LED Label
Color
State
Meaning
A/L
Off
Off
Port is not enabled.
Green
On
Port is enabled and the link is up. The MPA A/L LED will
blink green when there is traffic activity.
blink green when there is traffic activity.
Amber
On
Port is enabled and the link is down.
STATUS
Off
Off
Modular port adapter power is off.
Green
On
Modular port adapter is ready and operational.
Amber
On
Modular port adapter power is on and good, and the
modular port adapter is being configured.
modular port adapter is being configured.