Cisco Systems ASR9001 Manual De Usuario
3-21
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
OL-26701-02
Chapter 3 Installing Modules and Cables in the Chassis
Powering on the Router
Figure 3-12
Typical Power Connections for a Single DC Power Module
Step 4
Proceed to the
Powering on the Router
Use this procedure to turn on power to either an AC-powered or DC-powered router:
Step 1
Power on the circuit breaker to your power sources.
Step 2
Verify that the Power Input LED on each power module is lit.
Step 3
Set the power switch to the ON position.
Step 4
Verify that the Green Power LED on each power module is lit.
331933