Cisco Systems 78 Manual De Usuario
2-5
Cisco 828 Router and SOHO 78 Router Hardware Installation Guide
78-12837-02
Chapter 2
Installation
Installing Your Router
•
If you must supply your own cable, see the cabling specifications in
Appendix A. If this appendix does not provide specifications for a particular
cable, we strongly recommend ordering the cable from Cisco Systems.
Appendix A. If this appendix does not provide specifications for a particular
cable, we strongly recommend ordering the cable from Cisco Systems.
Installing Your Router
To install the Cisco 828 router or the SOHO 78 router, you need to perform the
following tasks in order:
following tasks in order:
•
Connect the Ethernet devices to the router.
•
Connect the G.SHDSL line.
•
Connect a terminal or PC to the router (for software configuration, using the
command-line interface [CLI], or for troubleshooting).
command-line interface [CLI], or for troubleshooting).
•
Connect the router to the power source.
•
Verify the router installation.
•
Mount the router.
Connecting Ethernet Devices
Table 2-2 lists the types of Ethernet devices you can connect to the router,
identifies the connections for each device, and tells the settings of the router TO
HUB/TO PC button for Ethernet port 4 (the default setting is IN).
identifies the connections for each device, and tells the settings of the router TO
HUB/TO PC button for Ethernet port 4 (the default setting is IN).
Table 2-2
Ethernet Device Connections
Network Device
Connected to Router
Connected to Router
Router Port
Ethernet Cable
Type
Type
1
Router TO
HUB/TO PC
Button Setting
HUB/TO PC
Button Setting
Network
Device
Button
Setting
Device
Button
Setting
2
Hub with equivalent to
router TO HUB/TO PC
button
router TO HUB/TO PC
button
ETHERNET port 4
Straight-through
IN
MDI (IN)
Hub with equivalent to
router TO HUB/TO PC
button
router TO HUB/TO PC
button
ETHERNET port 4
Straight-through
OUT
MDI-X
(OUT)
(OUT)