Cisco Systems 9001S Manual De Usuario
4-6
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
OL-26701-02
Chapter 4 Troubleshooting the Installation
Troubleshooting the Power Subsystem
Additional Power Subsystem Troubleshooting Information
This section contains additional troubleshooting information to help you isolate the cause of a power
problem.
problem.
Hardware and Software Identification
The power modules have software IDs that differ from the hardware ID labels on the chassis.
is a table for converting power module hardware IDs to software IDs.
Obtaining Temperature and Environmental Information
If both the RP and the fan tray are operating, all internal correct DC voltages are present.
Enter the show environment command at the router admin prompt to display temperature and voltage
information for each installed card, fan tray, and power module as shown in this example:
information for each installed card, fan tray, and power module as shown in this example:
RP/0/RSP0/CPU0:router(admin)#show environment
Sat Apr 15 04:57:35.185 UTC
Temperature Information
---------------------------------------------
R/S/I Modules Sensor (deg C)
0/RSP0/*
host Inlet0 31.1
host Inlet1 30.3
host Hotspot0 45.8
host Hotspot1 38.3
host Hotspot2 45.5
host Hotspot3 46.0
0/0/*
ep0 Inlet0 33.1
ep0 Hotspot0 38.5
ep1 Inlet0 33.6
ep1 Hotspot0 37.5
host Hotspot0 43.5
host Hotspot1 37.8
host Hotspot2 45.7
host Hotspot3 41.6
host Hotspot4 45.9
host Inlet0 36.0
Voltage Information
---------------------------------------------
R/S/I Modules Sensor (mV) Margin
Table 4-2
Power Module Hardware and Software IDs
Hardware ID
Software ID
PS0 M0
PM0
PS0 M1
PM1