Fujitsu 480 Manual De Usuario
3-118
C122-E003-02EN
MMB
CHAPTER 3 Web-UI Operations
CHAPTER 3 Web-UI Operations
3.5.2
Network Interface window
The [Network Interface] window allows you to specify IP addresses and other
information for MMB access. In this window, you can specify the following three
types of IP addresses:
information for MMB access. In this window, you can specify the following three
types of IP addresses:
IP Address: Specify the virtual IP address to be used to access the Web-UI. If the
MMB is duplicated, this virtual IP address will be taken by the active MMB.
MMB is duplicated, this virtual IP address will be taken by the active MMB.
IP Address for MMB#0: This item is displayed and can be set if MMB#0 exists on the
system. Specify the physical IP address to be assigned to the MMB#0 interface. The
Web-UI is also accessible from this interface. If MMB#0 does not exist on the
system, this table is unselectable.
system. Specify the physical IP address to be assigned to the MMB#0 interface. The
Web-UI is also accessible from this interface. If MMB#0 does not exist on the
system, this table is unselectable.
IP Address for MMB#1: This item is displayed and can be set if MMB#1 exists on the
system. Specify the physical IP address to be assigned to the MMB#1 interface. The
Web-UI is also accessible from this interface. If MMB#1 does not exist on the
system, this table is unselectable.
system. Specify the physical IP address to be assigned to the MMB#1 interface. The
Web-UI is also accessible from this interface. If MMB#1 does not exist on the
system, this table is unselectable.
Figure 3.52 [Network Interface] window
Table 3.86 Displayed and setting items in the [Network Interface] window
Item
Description
IP Address
Hostname
Hostname
Specify a host name. The default setting is the system name.
IP Address
Specify an IP address.
Subnet mask
Specify the subnet mask.