Fujitsu 480 Manual De Usuario
3-120
C122-E003-02EN
MMB
CHAPTER 3 Web-UI Operations
CHAPTER 3 Web-UI Operations
(2) GUI operation
1 Enter a subnet mask, IP address, etc. for network interface information, and
click the [Apply] button to set the specified values.
The specified IP address, subnet mask, etc. are then set.
The specified IP address, subnet mask, etc. are then set.
3.5.3
Management LAN Port Configuration window
The [Management LAN Port Configuration] window can be used to specify the speed
and duplex mode of each MMB port and set up a VLAN between the LAN port of the
partition connected to the management LAN and the MMB LAN port.
and duplex mode of each MMB port and set up a VLAN between the LAN port of the
partition connected to the management LAN and the MMB LAN port.
Remarks: If the Speed/Duplex setting of an MMB LAN port is not "AUTO," use a
cross cable for the interconnection between the MMB LAN port and the
switching hub.
switching hub.
Figure 3.53 [Management LAN Port Configuration] window