ATTO Technology 2500C Manual De Usuario

24

ATTO ExpressNAV

A text field beneath the box lists the most recent 
commands issued to the iPBridge through this 
page.
If you enter an incorrect parameter, the CLI 
help text is displayed, showing the parameters 
available.

3

If your entry was correct, type 
saveconfiguration

4

Click the Submit button. Your changes are 
implemented.

You may update firmware using ExpressNAV. Refer to 

Implements a firmware restart of the bridge and makes 
permanent any changes you have made since the last 
firmware restart.

1

Click the Restart button. 

A box tells you to wait until the counter gets to 
0 and then the browser refreshes. 

2

If the browser does not refresh after the counter 
gets to 0, click the link to refresh it manually. 

Note

Gives help information about the command line 
interface commands and troubleshooting tips via links 
to pages with help text for each category of options 
and one link to the Troubleshooting Tips and FAQs 
page on the ATTO website, 

www.attotech.com

, or 

from the CD included with your iPBridge.
Contact information for ATTO technical support is on 
the right.
Help is always available by pressing any word shown 
in red on the screen.