ATTO Technology 2500C Manual De Usuario

Descargar
Página de 77
39
 
ATTO Technology Inc. iPBridge Installation and Operation Manual
 7.1.2  General use commands
These CLI commands are used in a variety of situations
Help
Displays a list of available commands. If a command 
name is specified, displays detailed command-
specific information.
Immediate command: Help [command name]
Password
Specifies a password for all sessions: NDMP, telnet, 
FTP and ExpressNAV web-based interface. A 
prompt asks for the current password, to enter the 
new password, and to confirm the new password. 
Passwords are case sensitive, 0-32 characters with 
no spaces. An empty password can be configured by 
entering the Password confirmation prompts with 
no parameters. The command 
RestoreConfiguration default sets the password 
to its default value.
Default: Password
Set syntax: set Password
Requires a SaveConfiguration command
ReadOnlyPassword
Specifies a read only password for all sessions: 
NDMP, telnet, FTP and ExpressNAV web-based 
interface. A prompt asks for the current password, to 
enter the new password, and to confirm the new 
password. Passwords are case sensitive, 0-32 
characters with no spaces. An empty password can 
be configured by entering the Password 
confirmation prompts with no parameters. The 
command RestoreConfiguration default sets the 
password to its default value.
Default: Password
Set syntax: set ReadOnlyPassword
Requires a SaveConfiguration command
ReadOnlyUsername
Specifies a read only user name for all telnet, FTP 
and ExpressNAV web server sessions. Username is 
case insensitive, 1-32 characters with no spaces.
Default: user
Set syntax: set ReadOnlyUsername [username]
Requires a SaveConfiguration command
Get syntax: get Username
RestoreConfiguration
Restores configuration to either the default 
configuration or the configuration last saved into 
non-volatile memory. The saved option undoes any 
changes made since the last save.
Immediate command: RestoreConfiguration 
[Default | Saved]
SaveConfiguration
Many commands require a SaveConfiguration 
command to be executed indicated by the return 
Ready. *
 
When you invoke SaveConfiguration, the current 
configuration is permanently saved in the iPBridge 
and the new configuration becomes the active 
configuration. 
If a firmware restart is required to make the 
requested change permanent, a prompt asks you to 
confirm the restart. You can override this request by 
indicating the override value on the command line. 
You may make several changes through commands 
and SaveConfiguration before implementing the 
restart, but once you have restarted the iPBridge, all 
the command changes created before the restart and 
save are implemented. If you select the restart 
option, the iPBridge executes its complete start up 
cycle.
Restart or no Restart parameter is optional
Immediate command: SaveConfiguration <Restart | 
NoRestart>