Cisco Systems UCSCPCIEBTG Manual De Usuario
Procedure
Purpose
Command or Action
Enters the virtual media command mode.
Server # scope vmedia
Step 1
Specifies the volume name to unmap.
Server /vmedia # unmap volume_name
Step 2
This example shows how to unmap a local vmedia volume:
Server #
scope vmedia
Server /vmedia #
show mappings
Volume
Map-status
Drive-type
remote-share
remote-file
mount-type
------
----------
------------
--------------------- -------------------
-----------
Huu
OK
removable
http://10.104.236.99/ rhel-server-6.1-x86_6.iso
www
Rhel
OK
CD
http://10.104.236.99/ rhel-server-6.1-x86_6.iso
www
Server /vmedia #
unmap huu
Server /vmedia #
show mappings
Volume
Map-status
Drive-type
remote-share
remote-file
mount-type
------
----------
------------
--------------------- -------------------
-----------
Rhel
OK
CD
http://10.104.236.99/ rhel-server-6.1-x86_6.iso
www
Server /vmedia #
Managing Serial over LAN
Serial Over LAN
Serial over LAN (SoL) is a mechanism that enables the input and output of the serial port of a managed system
to be redirected via an SSH session over IP. SoL provides a means of reaching the host console via CIMC.
to be redirected via an SSH session over IP. SoL provides a means of reaching the host console via CIMC.
Guidelines and Restrictions for Serial Over LAN
For redirection to SoL, the server console must have the following configuration:
• console redirection to serial port A
• no flow control
• baud rate the same as configured for SoL
• VT-100 terminal type
• legacy OS redirection disabled
The SoL session will display line-oriented information such as boot messages, and character-oriented screen
menus such as BIOS setup menus. If the server boots an operating system or application with a bitmap-oriented
menus such as BIOS setup menus. If the server boots an operating system or application with a bitmap-oriented
Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
OL-28893-01
61
Managing Remote Presence
Managing Serial over LAN