Cisco Systems UCSCPCIEBTG Manual De Usuario
Purpose
Command or Action
(Optional) Displays the SoL settings.
Server /sol # show [detail]
Step 6
This example configures SoL:
Server#
scope sol
Server /sol #
set enabled yes
Server /sol *#
set baud-rate 115200
Server /sol *#
commit
Server /sol #
show
Enabled Baud Rate(bps)
Com Port
------- --------------- --------
yes
yes
115200
com2
Server /sol #
show detail
Serial Over LAN:
Enabled: yes
Baud Rate(bps): 115200
Com Port: com2
Baud Rate(bps): 115200
Com Port: com2
Server /sol #
Launching Serial Over LAN
Procedure
Purpose
Command or Action
Opens a serial over LAN (SoL) connection to the redirected
server console port. You can enter this command in any
command mode.
server console port. You can enter this command in any
command mode.
Server# connect host
Step 1
What to Do Next
To end the SoL session, you must close the CLI session. For example, to end an SoL session over an SSH
connection, disconnect the SSH connection.
connection, disconnect the SSH connection.
Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
OL-28893-01
63
Managing Remote Presence
Launching Serial Over LAN