Cisco Systems 512 Manual De Usuario
3-3
Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide
OL-9137-02
Chapter 3 Installing the Cisco Wide Area Application Engine
Installing the Cisco Wide Area Application Engine
Installing the Chassis in a Two-Post Rack
The chassis mounts to two rack posts with brackets that attach to the sides of the
chassis. These brackets are for a 19-inch (48.26-cm) equipment rack and require
four screws in each bracket. (See
chassis. These brackets are for a 19-inch (48.26-cm) equipment rack and require
four screws in each bracket. (See
.)
Figure 3-1
Rack-Mount Brackets
Warning
To prevent bodily injury when mounting or servicing this unit in a rack, you
must take special precautions to ensure that the system remains stable. The
following guidelines are provided to ensure your safety:
must take special precautions to ensure that the system remains stable. The
following guidelines are provided to ensure your safety:
•
This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
•
When mounting this unit in a partially filled rack, load the rack from the bottom to the
top with the heaviest component at the bottom of the rack.
top with the heaviest component at the bottom of the rack.
•
If the rack is provided with stabilizing devices, install the stabilizers before mounting
or servicing the unit in the rack.
or servicing the unit in the rack.
Statement 1006
124554
Orientation for 19-inch rack