Cisco Systems 512 Manual De Usuario

To install the chassis in a two-post rack, follow these steps:

Attach a bracket to one side of the chassis, aligning the front flange of the bracket 
with the hash mark on the side of the chassis. (See 

Attach a second bracket to the opposite side of the chassis in the same manner. 

After you secure the brackets to the chassis, rack-mount the chassis by threading 
at least two screws through the bracket flanges on each side of the chassis into the 
corresponding holes in each side of the rack. You need two people to install the 
chassis in the rack—one person to hold the chassis and one person to secure it to 
the rack.

The inlet and exhaust ports for cooling air are located in the front and rear of the 
chassis, respectively; therefore, multiple chassis can be stacked with little or no 
vertical clearance.

The four-post rack-mounting system does not require any tools for installation, unless 
you are shipping a device mounted in a rack. When you are shipping a device in a rack, 
you need a Phillips screwdriver. 

 shows the items that you need to install 

the chassis in a four-post rack. If any items are missing or damaged, contact your 
place of purchase. 

124555

Front

Rear