Chief Manufacturing CTA-100 Manual De Usuario

Installation Instructions

CTA-100

INSTALLATION INSTRUCTIONS
STEP 1

Figure 2. Assemble Center Plates and Side Plates

Figure 3. Attach Center Plates and Side Plates

Assembling the Center Plates and Side Plates

Assemble center plates and side plates, as follows:

1. Locate two center plates (20) and two side plates

(30). See Figure 2.

NOTE:

The two side plates fit inside the two center
plates. To assemble the unit, slide the two side
plates into the cuffed center plates.

2. Interconnect the first side plate (30) with both center

plates (20) as shown in Figure 2.

3. Repeat step 2 to interconnect the second side plate

(30) with the center plates (20).

Attaching the Center Plates and Side Plates

Attach center plates and side plates, as follows:

1. On the top, install four flat washers (70) and four

M5 X 8mm button head cap screws (60) into the
threaded holes in the side plates (30). See Figure 3.

2. Repeat step 1 to attach the side plates on the bottom

of the unit.

NOTE:

The screws can be adjusted later when the
width of the VCR/DVD is apparent.

(70)

(60)