Chief Manufacturing CTA-100 Manual De Usuario

Installation Instructions  

CTA-100 

 

 

6

 

 
 
 
 
 
 
 
 
 

 

 

 

Install foam pads on adjustment plates, as follows:  

1.  Locate two foam pads (50) and two adjustment 

plates (40). See Figure 4. 

2.  Remove protective tape from foam pad (50) to 

expose the bond side. 

3.  Install foam pad (50) on underside of top adjustment 

plate (40). 

4.  Repeat steps 2 and 3 to install the foam pad (50) on 

the second adjustment plate (40). 

 
 
 
 
 
 
 
Installing Adjustment Plates 

Install top adjustment plates, as follows:  

1.  Install two flat washers (70) and two M5 X 8mm 

button head cap screws (60) into the threaded holes 
in the side plates (30). See Figure 5. 

2.  Repeat step 1 to install the second adjustment plate. 

The screws can be adjusted later when the 
height of the VCR/DVD is apparent. 

 

 

(40)

(70) 

(60) 

ADJUSTMENT PLATE (40)

ADJUSTMENT 
PLATE (40) 

INSTALL FOAM 
PAD (50) TO 
UNDERSIDE OF 
TOP ADJUSTMENT 
PLATE OF (40).

(50)