Cabletron Systems HSIM-FE6 Manual De Usuario

 

To install the HSIM-FE6 the following items are required:

 

Antistatic wrist strap

 

Phillips screwdriver

 

Fast Ethernet (Port) Interface Modules (FEPIMs) in the appropriate 
media

 

Unpack the HSIM-FE6 as follows:

 

Remove the HSIM-FE6 from the shipping box.

 

Leave the module in its antistatic bag until you are ready to install it.

 

Attach the antistatic wrist strap (refer to the instructions on the 
antistatic wrist strap package for proper use).

 

After removing the module from its antistatic bag, visually inspect the 
device. If you notice any sign of damage, contact the Cabletron 
Systems Global Call Center immediately. Refer to 

 for 

instructions. Save the antistatic bag in the event the module must be 
reshipped.

 

Before attempting to use the HSIM-FE6 you should be familiar 
with the 

 

IEEE 802.3, 802.3 10BASE-T, 

 

and 

 

802.3u 100BASE-T 

Specifications.

 

The HSIM-FE6 and the host platform are sensitive to static 
discharges. Use an antistatic strap and observe all static 
precautions during this procedure. Failure to do so could result 
in damage to the HSIM-FE6, host module or device.