Cabletron Systems HSIM-FE6 Manual De Usuario
Installing Fast Ethernet (Port) Interface Modules
HSIM-FE6 User’s Guide
2-3
Figure 2-1
Removing the FEPIM Coverplate
2.
forward to allow room for the FEPIM to be aligned over the connector.
3.
Align the FEPIM connector into the HSIM-FE6 connector pins. See
.
!
CAUTION
Before installing an FE-100FX or FE-100F3 module into the
host module, remove the protective cover on the SC connector.
host module, remove the protective cover on the SC connector.
!
CAUTION
Ensure that the FEPIM connector aligns with the HSIM-FE6
connector pins to prevent bending the pins. This can damage
both the HSIM-FE6 and the FEPIM.
connector pins to prevent bending the pins. This can damage
both the HSIM-FE6 and the FEPIM.
coverplate_remove
FEPIM
Coverplate
Standoff Screws
HSIM-FE6
FEPIM 2
SP
FEPIM 1