Cabletron Systems HSIM-W6 Manual De Usuario

Chapter 7: General Configuration Using Local Management

HSIM-W6 User’s Guide

145

AdminStatusTime —

Displays the amount of time elapsed since an IP address was assigned to

the HSIM-W6.

UDP Type —

Displays the User Datagram Protocol (UDP) Service to which the selected UDP

Port number corresponds.

Description —

Describes the selected port.

MAC Address —

Displays the physical (MAC) address of the HSIM-W6.

Interf. Type —

Displays the type of interface used by the specified port.

Oper Status —

Displays the operational status of the selected port.

IP General Configuration Fields

This section provides a general overview of the procedures required to configure the HSIM-W6.
The following list describes each of the IP General Config Screen fields.

+PORT- —

Use this field to select the routing port you wish to configure.

+REDIRECTOR- —

Use this field to toggle through a list of commonly used UDP port numbers.

UDP port numbers are associated with the relay agent functionality of the router.

Framing —

Use this field to select the format of the frame in which IP packets are encapsulated

for transmission.

MTU —

Use this field to set the Maximum Transmission Unit (MTU).

IP Routing —

Use this field to enable IP Routing Services.

IP Forwarding —

Use this field to enable IP Forwarding.

Proxy ARP —

Use this field to enable Proxy Address Resolution Protocol (ARP).

Address —

Use this field to assign an IP address to the port that you wish to configure.

Mask —

Use this field to set the subnet mask for the port that you wish to configure.

UDP Port —

Use this field to select a UDP port number for network service requests.

Network Bcast —

Use this field to send network broadcasts addressed to all 0’s.