Cabletron Systems HSIM-W6 Manual De Usuario

146

HSIM-W6 User’s Guide

Routing Services allows you to choose the ports that you want to configure for IP routing. To select 
a router port to configure for IP routing, complete the following steps:

Use the arrow keys to highlight the PORT field.

Type in the number of the port that you want to configure for IP routing and then press ENTER.

If you type in an invalid port number, the error message “PORT NUMBER IS OUT OF RANGE” 
displays. Perform steps 1 and 2 again.

All IP hosts must have an IP address for each network interface. These addresses identify each 
network connection. 

To enter the IP address for a router port, complete the following steps:

Use the arrow keys to highlight the ADDRESS field.

Type in the IP address and then press ENTER.

To enter the subnet mask for a router port, complete the following steps:

Use the arrow keys to highlight the MASK field.

Type in the subnet mask for the IP address that you have assigned.

Use the arrow keys to highlight the SAVE option at the bottom of the screen and then press 
ENTER. The message “SAVED OK” displays.

You can type in the port number, or you can use the 

 option at the bottom of 

the screen to scroll through the list of the ports on your device. To use the 

option, use the arrow keys to highlight the 

(to go forward), or the 

 (to go backward), 

and then press ENTER to scroll through the available ports in the direction you have 
selected. You can also use the + and - keys to scroll through the available ports.