Cabletron Systems HSIM-G01 Manual De Usuario

 

To install the HSIM-G you need the following items:

 

Antistatic wrist strap 

 

Phillips screwdriver

 

Unpack the HSIM-G as follows:

 

Remove the shipping box material covering the HSIM-G.

 

Carefully remove the module from the shipping box. Leave the module 
in its non-conductive bag until you are ready to install it.

 

Attach the antistatic wrist strap. If the HSIM-G is to be installed in a 
standalone device, refer to the instructions on the antistatic wrist strap 
package. If the HSIM-G is to be installed in an interface module, refer 
to the applicable interface module User’s Guide.

 

After removing the module from its non-conductive bag, visually 
inspect the device. If you notice any signs of damage, contact 
Cabletron Systems immediately. Refer to 

 for instructions.

 

Only qualified personnel should install or service this unit.

 

Before attempting to use the HSIM-G you should be familiar 
with the 

 

IEEE 802.3z 

 

specification. The network installation 

must meet the guidelines contained in the draft specification to 
ensure satisfactory performance of the equipment.

 

The HSIM-G and the host module or device (host platform) are 
sensitive to static discharges. Use a grounding strap and 
observe all static precautions during this procedure. Failure to 
do so could result in damage to the HSIM-G or host platform.