Bradley Smoker 1734-AENT Manual De Usuario
Publication 1734-UM011C-EN-P - January 2006
5-4 Configure the Adapter for Direct Connection and Rack Optimization in RSLogix 5000 Software
5. Complete the Create In entry by selecting the folder where you
want to save the RSLogix 5000 file.
6. To use redundancy in your system, check the Redundancy
Enabled checkbox so that a checkmark appears.
RSLogix 5000 software, version 11 and later, includes enable
redundancy. This example does not use redundancy.
redundancy. This example does not use redundancy.
7. Click OK.
Configure the I/O Modules
You now add the POINT I/O modules to the controller I/O
configuration. To do this, first add the local 1756-ENBT module to the
I/O configuration. Next add the 1734-AENT adapter as a child of the
1756-ENBT module. Then add the I/O modules as children of the
1734-AENT adapter.
configuration. To do this, first add the local 1756-ENBT module to the
I/O configuration. Next add the 1734-AENT adapter as a child of the
1756-ENBT module. Then add the I/O modules as children of the
1734-AENT adapter.
Add the Local EtherNet/IP Bridge to the I/O Configuration
1. Select the I/O Configuration folder in the project dialog, and
click the right mouse button.
A dialog opens.
IMPORTANT
Click the Help buttons on the configuration dialog
shown in this section if you need assistance in
selecting and setting the parameters.
shown in this section if you need assistance in
selecting and setting the parameters.