Cabletron Systems WPIM-RT1 Manual De Usuario

Chapter 2: Setup and Installation

The host platform displays LED indications of the WPIM-RT1’s 
operation. For more information on LED indications, refer to the host 
platform manual.

Before the WAN cable can be connected to the WPIM-RT1, you must use 
QuickSET software or Local Management to configure the WPIM-RT1. 
Refer to the QuickSET manual or 

how to access the Wide Area configuration for the WPIM-RT1 for the 
CSX400 and HSIM-W6 host platforms, and the HSIM-SSA710 User’s 
Guide for the HSIM-SSA710 as the host platform.

The WAN configuration must be completed before proceeding to the next 
step.

Before connecting any cabling to the WPIM-RT1, refer to the host 
platform manual for WAN setup instructions. Only after completing the 
WAN setup from the host platform manual, for Local Management or 
from QuickSET, can this section (

completed.

DO NOT plug the WAN cable into the external WAN connection 
until you have properly completed the WAN setup in software. If 
this cable is plugged in prematurely, before the host unit is 
configured, the telephone company can disable the WAN line 
for a period of time. The cable will be plugged in as a final step 
once you run the QuickSET configuration, or the Local 
Management configuration.