3com 4000 Manual De Usuario

A

PPENDIX

 B: R

EMOTE

 S

OFTWARE

 U

P

/D

OWNLOADING

 P

ROCEDURES

3 Next, go to the Modem selection and enter the "AT" string required to 

initialize the modem you have connected to your COM port.

4 Select the Telephone Number selection and enter the phone number 

of the modem connected to the remote AccessBuilder.

5 At this point this information should be saved in a filename related to 

the target remote AccessBuilder. 

This procedure is used to copy a new version of AccessBuilder system 
software image from the local PC into the flash memory of a remote 
AccessBuilder without affecting the existing configuration. Note that 
the server is automatically reset upon successful completion of the 
image download.

CAUTION: Whenever an image or configuration file download 
transfer occurs, the remote AccessBuilder suspends any user session in 
progress and automatically resets upon completion, thus disconnecting 
any active users. For this reason, maintenance downloads should be 
announced to the system users well in advance of the event, and 
scheduled at a time that minimizes network disruption.

1 From the local PC running either the TABM application or the Windows 

terminal emulator, dial into the modem connected to the 
AccessBuilder’s console port.

2 Navigate through the login prompts by entering the SU (SuperUser) 

command and your password as described in the following example:

 Login: su

 Password:; type in your password here

3 Within the UI, type the following command to enter the nindy mode:

 \> nindy;system will enter the nindy mode

4 Within nindy, type the following commands:

 -> nh;start nindy header

 -> rs ;reset the system

ab4kbook  Page 8  Thursday, March 27, 1997  11:51 AM