Samsung RIF-BT10 Manual De Usuario

                                                     

      

 
 

6

5) Bluetooth master setting 

            - Connect Bluetooth main (master/slave) to USB (or Serial) port of PC. 

      - Execute 

from the downloaded files

 

      - Select the port  

a) USB port: Select the virtual port 

 of step 2). 

b) Serial (RS-232C): Select the COM x connected. 

      - Configure Adapter setting: 

      - Register Printer setting: Search the printers around and save the printer address by   

button 

. Make sure the printers are all power on mode.     

      - Configure Adapter setting: Check in

 

            - Click 

. 

  - Refer to Attachment 5. 

 

 

      6) Printer driver installation & Test page printing  

- Once the setting’s complete, disconnect the Bluetooth master from the PC, reconnect it and initialize 

the system. Turn the printer off and then on to initialize the Bluetooth slave. 

- 

 for the Bluetooth master and slave are automatically 

reconnected. 

- Install the printer driver (Available at website) 

          a) SRP 350: V3.0.5E above 

          b) SRP 270: V3.0.3E above 

- You can download the printer driver from the homepage. Make sure that you delete the older version   

driver from the PC before you install the new one(Clean register) 

- Open the printer driver and select a port   

a) USB port: Select the virtual port 

 of step 2). 

b) Serial (RS-232C): Select the COM x connected.

 

- Set the port settings as below 

(19200, 8, none, 1, hardware) 

- Test Page Printing.

 

- Refer to Attachment 6. 

 

 

   7) Other 

- If you are a POS Application Programmer, refer to the manual below for more information. 

              :