3com 3C990B-TX-M Manual De Usuario

Maintaining Groups

71

retry count
This command sets the number of retries that the software attempts when a probe packet 
fails to appear at the receive end. After the retries, the software puts the board in Wait 
mode. If no argument is specified or the specified argument is invalid, the current value is 
displayed. Otherwise, the new value is displayed.

send timeout
This command sets the timeout value, in seconds, that the software waits before 
retransmitting a probe packet when a send request to the link support layer (LSL) is not 
acknowledged. A message is displayed for each loaded frame type.

ungroup
This command deletes a group. The LAN driver for the group must not be loaded. The 
following message appears for all frame types that the NIC supports:
Cleaning up resources for group associated with Primary Slot 

#xxxx.

Syntax

where:

number_of_retries is any positive integer

Example

Default

5

Syntax

where:

pri_slot is the PCI slot number of the primary NIC.

seconds is the time in seconds.

Example

Default

10

Syntax

where:

pri_slot is the PCI slot number of the primary NIC.

Example

Default

None