SMSC LAN9420 Manual De Usuario
Single-Chip Ethernet Controller with HP Auto-MDIX Support and PCI Interface
Datasheet
SMSC LAN9420/LAN9420i
101
Revision 1.22 (09-25-08)
DATASHEET
8
EEPROM Loaded
When set, this bit indicates that a valid EEPROM was found, and that the
MAC address and SSVID/SSID programming have completed normally. This
bit is set after a successful load of the MAC address and SSVID/SSID after
power-up, or after a RELOAD command has completed.
When set, this bit indicates that a valid EEPROM was found, and that the
MAC address and SSVID/SSID programming have completed normally. This
bit is set after a successful load of the MAC address and SSVID/SSID after
power-up, or after a RELOAD command has completed.
R/WC
0b
7:0
EPC Address (EPC_ADDR)
The 8-bit value in this field is used by the EEPROM Controller to address
the specific memory location in the Serial EEPROM.
This is a Byte aligned address.
The 8-bit value in this field is used by the EEPROM Controller to address
the specific memory location in the Serial EEPROM.
This is a Byte aligned address.
R/W
00h
BITS
DESCRIPTION
TYPE
DEFAULT